Tlhaloso ea Sehlahisoa
● Mochine ona o loketse tlhahiso ea lihlahisoa tse sekoti tsa polasetiki tsa 200ml-10L, ts'ebeliso ea sistimi e notletsoeng e kobehileng, tšebeliso e tlase ea matla, setsi sa senotlolo, senotlolo sa senotlolo, lebelo le potlakileng, se sebetsa hantle haholoanyane.
● Die bula le ho koala tsamaiso: ka ho khetheha etselitsoe bakeng sa Heng notlela hlobo mochine sebelisa e phahameng khatello ea mode notlela, ho notlela poleiti khatello ea kelello bohareng ba thempleite, clamping matla, bula e tiileng notlela thempleite, esita le haeba ultra wide die e boetse e kenngwa.
● Die head system: ts'ebeliso eohle ea 38CRMOALA le lisebelisoa tse ling, mochini o nepahetseng le kalafo ea mocheso.
● Hydraulic system: full hydraulic double proportional hydraulic control, e nang le thepa e tummeng ea brand hydraulic valve le pompo ea oli, e tsitsitseng, e ka tšeptjoang.
● Sesebelisoa sa lehlakore se fofang se ikemetseng: ho phaella ho sesebelisoa se phallang se ka tlosa ka nepo sehlahisoa sa thepa e setseng, 'me ka mofuta o otlolohileng oa sutu ho phaella ho sesebelisoa sa ho phalla le mofuta oa thipa ea rotary ho phaella ho sesebelisoa se phallang, thepa ea sebele ea ho iphelisa. ntle le ts'ebetso ea matsoho.
Tlhaloso
Tlhaloso | SLBU-65 | SLBU-80 |
Lintho tse bonahalang | PE,PP,EVA,ABS,PS... | PE,PP,EVA,ABS,PS... |
Bophahamo ba setshelo (L) | 5 | 10 |
Nomoro ea lefu (Setha) | 1,2,3,4,6,8 | 1,2,3,4,6,8 |
Sehlahiswa(dry cycle) (pc/hr) | 1000*2 | 950*2 |
Boemo ba Mochini(LxWxH) (M) | 4000*2300*2200 | 4600*2600*2600 |
Kakaretso ea boima ba 'mele (Ton) | 6.5T | 7.5T |
Sehlopha sa Clamping | ||
Clamping Force (KN) | 65 | 86 |
Setorouku sa ho bula poleiti | 220-520 | 300-600 |
Boholo ba poleiti(WxH) (MM) | 400*430 | 450*450 |
Boholo ba hlobo (WxH) (MM) | 460*430 | 500*450 |
Botenya ba hlobo (MM) | 255-280 | 305-400 |
Sehlopha sa Extruder | ||
Screw diameter (MM) | 65 | 80 |
Screw L/D ratio (L/D) | 25 | 25 |
Matla a ho qhibiliha (KG/HR) | 70 | 120 |
Nomoro ea sebaka sa ho futhumatsa (KW) | 15 | 20 |
Motlakase oa ho futhumatsa ka Extruder (Zone) | 3 | 3 |
Matla a ho khanna a Extruder | 15 | 30 |
Ho shoa hlooho | ||
Nomoro ea sebaka sa ho futhumatsa (Zone) | 2-5 | 2-5 |
Matla a futhumatsang moea (KW) | 6 | 6 |
Bohole ba bohareng ba li-double die (MM) | 130 | 160 |
Bohole ba bohareng ba tri-die (MM) | 110 | 110 |
Sebaka se bohareng sa tetra-die (MM) | 100 | 100 |
Sebaka se bohareng sa batho ba tšeletseng (MM) | 80 | 80 |
Bophahamo bo boholo ba die-pin (MM) | 180 | 260 |
Matla | ||
Boholo ba ho khanna | 18 | 35 |
Kakaretso ea matla (KW) | 50 | 82 |
Matla a fan bakeng sa screw (KW) | 2.4 | 3.2 |
Khatello ea moea (Mpa) | 0.6 | 0.6 |
Tšebeliso ea moea (m³/min) | 0.4 | 0.5 |
Kakaretso ea tšebeliso ea matla (KW) | 18 | 22 |