Tlhaloso ea Sehlahisoa
● Mochine oa hlooho ea hlobo: ho sebelisoa ha mofuta o arohaneng oa hlooho, eseng lisebelisoa tsa mocha, seaparo se sengata, seaparo sa seaparo, seaparo se selelele, ho sebetsa ka plating, eseng ho bokella lintho tse bonahalang, thepa e boreleli haholoanyane.
● Plasticizing system: frequency conversion motor Motlakase o thatafalitsoeng o nang le boleng bo phahameng ba nitride barrel screw, taolo ea lebelo le feto-fetohang, matla a sebetsang hantle le chai e tsitsitseng.
● Tsamaiso ea elektronike ea ho laola: tšebeliso ea mochine oa mochine oa PLC, lisebelisoa tsohle tse behiloeng, ho fetola ho khutlisa ho ka bonoa e le ts'ebetso, tsamaiso e sebetsa e tsitsitse, boemo bo nepahetseng ka sebele.
● Libaka tsa kopo: lijo, meriana, peterole, lik'hemik'hale, lik'hemik'hale, likoloi, lisebelisoa, lipapali le liindasteri tse ling.
● E ka ba le lisebelisoa tse nang le lisebelisoa tsa ho phalla: ho tšehetsa sesebelisoa sa ho itšeha le ho hula sesebelisoa sa ho qetela, ho sebetsa ka mokhoa o itekanetseng, ho boloka mosebetsi.
Tlhaloso
Tlhaloso | SLD-75 | SLD-80 |
Lintho tse bonahalang | PE,PP,EVA,ABS,PS... | PE,PP,EVA,ABS,PS... |
Bophahamo ba setshelo (L) | 10 | 15 |
Nomoro ea lefu (Setha) | 1,2,3,4,6 | 1,2,3,4,6 |
Sehlahiswa(dry cycle) (pc/hr) | 600 | 600 |
Boemo ba Mochini(LxWxH) (M) | 4300*2400*2200 | 4600*2600*2200 |
Kakaretso ea boima ba 'mele (Ton) | 7.5T | 8T |
Sehlopha sa Clamping | ||
Clamping Force (KN) | 65 | 68 |
Platen Open stroke (MM) | 220-520 | 300-650 |
Boholo ba poleiti(WxH) (MM) | 320*350 | 350*400 |
Boholo ba hlobo (WxH) (MM) | 400*350 | 450*400 |
Botenya ba hlobo (MM) | 225-320 | 305-350 |
Sehlopha sa Extruder | ||
Screw diameter (MM) | 75 | 80 |
Screw L/D ratio (L/D) | 25 | 25 |
Matla a ho qhibiliha (KG/HR) | 80 | 120 |
Nomoro ea sebaka sa ho futhumatsa (KW) | 20 | 24 |
Motlakase oa ho futhumatsa ka Extruder (Zone) | 4 | 4 |
Matla a ho khanna a Extruder (KW) | 22 | 30 |
Ho shoa hlooho | ||
Nomoro ea sebaka sa ho futhumatsa (Zone) | 2-5 | 2-5 |
Matla a futhumatsang moea (KW) | 8 | 8 |
Bohole ba bohareng ba li-double die (MM) | 130 | 160 |
Bohole ba bohareng ba tri-die (MM) | 110 | 110 |
Sebaka se bohareng sa tetra-die (MM) | 100 | 100 |
Sebaka se bohareng sa batho ba tšeletseng (MM) | 80 | 80 |
Bophahamo bo boholo ba die-pin (MM) | 200 | 280 |
Matla | ||
Boholo ba ho khanna (KW) | 24 | 30 |
Kakaretso ea matla (KW) | 62 | 82 |
Matla a fan bakeng sa screw (KW) | 3.6 | 3.6 |
Khatello ea moea (Mpa) | 0.6 | 0.6 |
Tšebeliso ea moea (m³/min) | 0.5 | 0.5 |
Kakaretso ea tšebeliso ea matla (KW) | 22 | 28 |