Tlhaloso ea Sehlahisoa
Litšobotsi tsa Tekheniki:
1. Mochini oa ho bopa oa servo ka lebelo le phahameng bakeng sa botlolo ho fihla ho 2SL. Tlhahiso e phahameng ka li-pcs / letsatsi ho tloha seteisheneng se habeli se nang le hlooho e le 'ngoe ea lefu. Crank-arm mold locking unit ho fana ka matla a mangata ho feta mefuta e tloaelehileng.
2. Mohala oa tlhahiso ea othomathike ka botlalo, ho kenyelletsa le auto de-flashing, lisebelisoa tsa litšila le phano ea libotlolo tsa ho qetela, khokahano e nepahetseng ho lisebelisoa tse ling tse thusang.
Tlhaloso
Li-Parameters tse ka sehloohong | Sehlopha sa LQYJHT100-25LII |
Bophahamo ba Max.Sehlahisoa | 30 L |
Seteishene | Habedi |
E Loketseng Raw Material | PE PP |
Dry Cycle | 400x2 PCS/H |
Screw Diameter | 100 limilimithara |
Screw L/D Karolelano | 24/28 L/D |
Matla a Screw Drive | 55/75 KW |
Screw Heating Power | 19.4/22 KW |
Screw Heating Zone | Sebaka sa 4/5 |
Sephetho sa HDPE | 150/190 Kg/h |
Matla a Pompo ea Oli | 22 KW |
Mold Open & Close Stroke | 420-920 limilimithara |
Mold Moving Stroke | 850 limilimithara |
Matla a Tlatsetsang | 180 Kn |
Boholo ba Setšoantšo sa Mold | 620x680 WXH(mm) |
Boholo ba hlobo | 600x650 WXH(mm) |
Mofuta oa Hlooho ea Lefu | Tsoela pele ho shoa hlooho |
Max.die bophara | 260 limilimithara |
E shoa hlooho ho futhumatsa matla | 10 KW |
Sebaka sa ho futhumatsa hlooho ea shoa | 5 LEBAKA |
Khatello ea ho foka | 0.6 MPA |
Tšebeliso ea moea | 0.8 M3/MIN |
Khatello ea metsi a pholileng | 0.3 MPA |
Tšebeliso ea metsi | 90 L/MIN |
Boemo ba mochini | (LXWXH) 4.8X3.9X3.1 M |
Mochini | 17.5 Lithane |